Stump Thrust 1

The concrete stump is positioned within the concrete footing, an ASF Stump resilient pad is fitted to the stump, then the bearers and joists are fixed into position.  Directly fixed to the top of the joists is the selected hardwood or American Maple flooring.  It has limited resiliency, easy to install and is very economical.

FOOTINGS & PIERS

These are to be installed in position as per engineer’s drawings including concrete footing with a general 100 x 100 concrete stump with tie down rod to local authority’s regulations.

PR ST1 Stump Cushion Pads

ASF's advanced PR ST1 Stump cushioned pad manufactured to ASF's requirements and fitted on top of each installed concrete stump.

BEARERS & JOISTS

The timber bearers and joists are to be capable of the spans as shown on the engineers design. Joining of the timbers is to be in accordance with the engineers drawing and the relevant Australian Standards.

FINISH FLOORING

Ex 75 x 25mm (nominal) thick T&G Flooring machined to ASF's requirements.

CONSTRUCTION

Most local authorities require a minimum 400mm (TBD) clearance between ground levels to underside of bearer. Bearer and joist size and spacing to be in accordance with engineers details

PERFORMANCE

Manufactured to ASF standards. Complies and or exceeds Australian, New Zealand and MFMA standards.

APPLICATION

Multipurpose, school halls, volleyball, badminton and basketball.

Stump Thrust 1

ECO FRIENDLY

The ST Floor systems are also available in fully sustainable materials to suit the most discerning of specifies and clients

Please contact your nearest ASF Distributor for more information on our sustainable Floor Systems

Click here for technical specifications.

© ASF 2017 Website by Joyer